Shimadzu Moisture analyzer – Balance – MOC63u

৳ 155,000.00

  • Call: 01715 130348

  • Shimadzu Moisture analyzer


    Brand: Shimadzu

    Country of Origin: Japan

In stock


Shimadzu Moisture analyzer – Balance – MOC63u


Halogen heater

Long-life and high power halogen heater provides quick and accurate measurement.
The temperature can be changed from 50 degrees to 200 degree Celsius.
You can check sample status from window while measurement.

Large pan size: 95mm dia

MOC63u has large pwn. (95mm diameter)
It can provide quick and accurate measurement to spread sample in thin layer on the pan.

Data management and easy operation

Built-in USB port

UniBloc technology

The measure results can be transferred by USB cable.
If connect with PC by USB, needs USB driver.
Please download from here.


Send balance data to Excel or other Windows applications without installing additional data communication software. By combining standard Auto print functions with typical spreadsheet functions, even difficult applications can be easily automated.

You can create graphs easily with WindowsDirect and Excel.
If you need templates, please download from here. (xls/69KB)
Connection to Windows Vista and Windows7.

Easy operation using a simple keypad

Features easy-to-operate software and keypad layout. In addition, an automatic starting mode saves measurement time, increasing your work efficiency. Operation simply requires ‘putting material on the pan and shutting the cover’. Internal memory can save 10 measurement conditions and 100 results. Various measurement modes provide extra support.

Various measurement modes

Ending modes:

Automatic ending mode

Automatic ending mode

Automatically ends measurement when moisture loss over the previous 30 seconds becomes smaller than specified percentage.

Timed ending mode

Timed ending mode

Automatically ends measurement when the specified amount of time has elapsed.

Alternative drying modes:

Rapid drying mode

Rapid drying mode

First dries with the highest temperature for the specified period, then shifts to the specified temperature, shortening measurement time.

Slow drying mode

Slow drying mode

Gently heats samples that might solidify at the surface or samples that reduce under high temperature.

Step drying mode

Step drying mode

Allows step-by-step change in drying conditions. This feature is useful when measuring samples that contain a large amount of water.

Starting mode:

Automatic starting modeStarts measurement immediately after closing the lid. It saves time in repeat measurements.

Specifications :

Capacity 60g
Dimension (W×D×H) mm 202 × 336 × 157
Measurement conditions data memory 10
Interface RS-232C (9-pin connector) I/O port
USB port
Timer setting 1-120 minutes or continuous
(max 12 hours)
Measurement modes Standard
(Easy start/Automatic end/Timed end)
Rapid drying
(Easy start/Automatic end/Timed end)
Slow drying
(Easy start/Automatic end/Timed end)
Step drying
(Easy start/Automatic end/Timed end)
Operational temperature and humidity range 5 to 40°C, 85%RH or lower
Weight 4kg
Pan Size 95mm dia
Minimum readability 0.001g
0.01/0.1% (Selectable)
Display LCD with backlight
Setting (There is a time restriction when exceeding 180°C.)
Temperature range 50-200°C (1°C increments)
Power 400W
Drying Heater Straight type halogen heater
Repeatability 0.15% (2g)
0.05% (5g)
0.02% (10g)
Data memory 100

Additional information

Weight 0.11100 kg




There are no reviews yet.

Be the first to review “Shimadzu Moisture analyzer – Balance – MOC63u”

You may also like…