4-in-1 pH/EC/TDS/Temp Tester with Replaceable Probe MW804 Romania

Description

4-in-1 pH/EC/TDS/Temp Tester with Replaceable Probe MW804 Milwaukee Romania

The Milwaukee MW804 MAX Waterproof 4-in-1 pH/EC/TDS/Temp Tester is designed as an all-in-one solution for growers.

The Milwaukee MW804 MAX Waterproof 4-in-1 meter offers:

ACCURACY

The MW804 MAX 4-in-1 tester is accurate to ±0.05 pH, EC/TDS to 2% Full Scale and ±0.5°C / ±1°F for temperature.

With automatic calibration and 5 memorized calibration points, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration.

LONG LIFE

The tester comes with a replaceable pH probe with a double junction probe design for longer life.

FAST RESPONSE

An exposed temperature probe is located close to the pH probe for fast temperature compensation

WATERPROOF CONSTRUCTION

No more worries about dropping your tester while measuring. The MW804 MAX is fully waterproof to IP65.

LIGHT WEIGHT

At just 3.5 ounces, the MW804 MAX is easy to handle at up to half the weight of other testers.

EASE-OF-USE

A large dual level LCD screen makes reading results easy while a stability indicator and hold function that freezes the display takes the guess work out.

DESIGN FEATURES

• Fast easy to read results with large digital dual LCD readout.
• Extreme accuracy to ±0.05 pH, EC / TDS 2% Full Scale and Temperature ±0.5 C / ±1 F.
• Range 0.00 – 14.00 pH, EC 20.00 mS/cm, TDS 0 – 10.00 ppt, Temperature: 0.0 to 50.0 C / 32.0 to 122.0 F.
• Lightweight and portable at just 3.5 ounces.
• Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.
• Simple push button, automatic one or two-point calibration with 5 saved calibration points.
• Gel-filled, double junction pH electrode for low maintenance and high performance.
• Waterproof to IP65.
• Auto shut off and low power demand for approx. 100 hour of continuous use (batteries included).

CARE AND USE

The MW804 MAX Tester includes both a pH and EC electrode. Both need maintenance.

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!

EC sensors are more robust but can still be affected by residue build up.

Here are our top four tips.

1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor.
4. Gently stir the MAX Tester in the sample for a faster result.
5. Rinse in water after every test.

 

Specification:

• pH Range: 0.00 to 14.00 pH
  EC Range: 20.00 mS/cm
  TDS Range: 0 to 10.00 ppt
  Temp Range: 0.0 to 50.0°C / 32.0 to 122.0°F
  pH Resolution: 0.01 pH
  EC Resolution: 0.01 mS/cm
  TDS Resolution: 0.01 ppt
  Temp Resolution: 0.1 C / 0.1 F
  pH Accuracy: ±0.05 pH
  EC/TSD Accuracy: 2% Full scale
  Temp Accuracy: ±0.5°C / ±1°F
  Temperature Compensation: Automatic with ß=0.0 to 2.4%/°C
  Calibration automatic, 1 point for EC and 1 or 2 points for pH
  TDS Factor: 0.45 to 1.00 (conv.)
  Probe: Mi60P (replaceable)
  Environment: 0 to 50°C; 100% RH max.
  Battery Type: 4 x 1.5V; IEC LR44, A76 (included)
  Battery Life: approx. 100 hours of use
  Auto-off after 8 minutes of non-use
  Dimensions: 7.9 inches × 1.5 inches (diameter)
  Weight: 3.5 ounces.

More Details…..Click here